Pluto Valve for Splash Photography，The Perfect Water Drop Photography Experience - Smartphone Controllable Camera Trigger
Pluto Valve for Splash Photography，The Perfect Water Drop Photography Experience - Smartphone Controllable Camera Trigger by Pluto at Info Graphic Sly. MPN: Pluto. Hurry! Limited time offer. Offer valid only while supplies last. VALVE USE GUIDE Use environment and associated accessories：Water droplet collision photos need to be taken in a darkened room. But it does not need to be completely dark. You will need a camera, a speedlite flash, a tripod, and a magic arm to hold up the valve and the Pluto Valve Kit. step one: Fill the tube with water. Insert and press the small tube. Make sure that the air above the water and between the small tube and the large tube does not leak.Open the valve and remove air from the valve
Product Description & Reviews
VALVE USE GUIDE Use environment and associated accessories：Water droplet collision photos need to be taken in a darkened room. But it does not need to be completely dark. You will need a camera, a speedlite flash, a tripod, and a magic arm to hold up the valve and the Pluto Valve Kit. step one: Fill the tube with water. Insert and press the small tube. Make sure that the air above the water and between the small tube and the large tube does not leak.Open the valve and remove air from the valve. Please try multiple short clicks. Step two: Open your camera, frame and adjust the focus. The shutter speed is set to 1-2 seconds. The drive mode is set to IR Remote. If your camera does not support infrared remote control, you will need to set up the camera manually. Use a valve cable to connect the valve to the Aux port of the Pluto Trigger. Connect the flash to the camera port of the Pluto Trigger. Step three: Turn on your Pluto Trigger. Launch the Pluto Trigger app on your phone. Set the IR settings to match your camera model. Select Droplet mode from the menu. Press the start button to test. The Pluto Trigger should send IR commands to trigger your camera, release two droplets and then trigger your flash. Step four: Next, we will calibrate the time to capture the droplet collision. First determine the Flash delay calibration. Set "Drop1 Size" to 10ms and "Drop2 Size" to 0, which will only release a drop. The flash should be triggered when the first drop bounces from the water and rises to the highest position. Click the Auto Calibration button to the right of the Flash Delay settings. Set "Step" to 5ms, "Interval" to 5s, and click the Start Calibration button. The Pluto Trigger now takes a photo every 5 seconds, increasing the flash delay by 5 milliseconds each time. Monitor the camera's screen. When the droplet reaches the highest point, the calibration is stopped. Set the Drop2 Size to 10ms and calibrate the Drop2 Delay.
Features & Highlights
- Accurate, fast and perfect capture of water droplets - The Pluto Splash Trigger has a 33 cm long tube with a diameter of 3 cm that can release different water droplets with the help of the application. It can help you get the perfect size of water droplets you want.
- Scope - You can use Pluto Valve for Splash Photography to fully control the time and size of drop drops.
- Use mobile phone range - for a variety of different smart phones, compatible with Apple and Android OS devices, download the app to use this trigger feature
- Battery capacity (without battery included in the product package) - A regular alkaline battery powers the portable Pluto. No messy cable settings! Just replace the battery and continue to use it.
- Provide upgrades - Pluto Trigger has the "Upgrade firmware via wireless" feature, Work with the Pluto trigger, just go to the App and select Firmware Upgrade.
Shutter Release Cords
3.5 x 2.52 x 14.21 inches
Have questions about this item (Pluto), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Pluto, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Remote Shutter Release for Canon Eos, PIXEL 2.4G Wireless Shutter Release Timer Remote Control E3/N3 for Canon 7D Series, 6D Series, 5D Series, 50D, 40D, 30D, 10D, 600D, 500D, 400D
mpn: PS-TW283-E3/N3, ean: 0651810105319,
Package included: TW-283 Transmitter X 1 TW-283 Receiver X 1 Shutter Connecting Cable X 2 User Manual X 1 (Batteries are no include)Compatible with Canon EOS 10D 20D 30D 40D 50D 5D 5D Mark II 5D Mark III 5DS 5DS R 6D 7D 7D Mark II 1D 1Ds 1D Mark II 1...
mpn: RF-605C, ean: 0700355606512,
Compared with RF-603 II, RF-605 has below function:1, it has two communication modes RF-602 and RF-603, so you can use RF-605, RF-603 II, RF-602 together. ( but you can't use them in group function together )2, it has TX (single transmit) / RX ( sing...
mpn: RM-CB2, ean: 0050332191235,
Designed especially for the Olympus OM-D E-M1 Mark II, This release Cable with a pin jack terminal (2. 5mm diameter) Features a Bulb lock function convenient for long exposures. The connector features an L-shaped design to ensure a compact form when ...
Notice: 1. Before operating this Timer Remote Control, please read the User Manual completely and save this manual for future use. 2. Batteries - Please use four new batteries - Please install batteries correctly to the compartment according to the +...