KEKAI Compatible CB09 CB09U Graphtec Blade Holder Base with 30pcs (30/45/ 60 Degree) Graphtec Blade Vinyl Cutter Plotter Cutting Blades Silhouette Cameo (30 PCS Cutter Blades)
KEKAI Compatible CB09 CB09U Graphtec Blade Holder Base with 30pcs (30/45/ 60 Degree) Graphtec Blade Vinyl Cutter Plotter Cutting Blades Silhouette Cameo (30 PCS Cutter Blades) by KEKAI at Info Graphic Sly. MPN: KEKAI. Hurry! Limited time offer. Offer valid only while supplies last. CB09 Graphtec Blade Holder Vinyl Plotter Holder with 30pcs Blades Which can help install: You can use a magnifying glass, strong light and most importantly handling the blade and spring with tweezers (which will save you sticking yourself). How to set your depth by using a scrap of vinyl? Using your hand to hold and pull the knife housing with the blade set to where you can hardly see it...and with a little pressure you pull it across the vinyl. Do this several times while adjusting the screw,
Product Description & Reviews
CB09 Graphtec Blade Holder Vinyl Plotter Holder with 30pcs Blades Which can help install: You can use a magnifying glass, strong light and most importantly handling the blade and spring with tweezers (which will save you sticking yourself). How to set your depth by using a scrap of vinyl? Using your hand to hold and pull the knife housing with the blade set to where you can hardly see it...and with a little pressure you pull it across the vinyl. Do this several times while adjusting the screw, until it does not cut the backing paper. you can laid a magazine under the vinyl to protect the table. Please set up the depth just right. Be sure to do a depth test cut so you don't ruin your project!just compare it to the Cameo blade and then do a test cut. Once you've installed the blade, turn the button at the other end of the holder to adjust the cut thickness. unscrew the black tip, insert the blade, add the spring, screw the tip back on. The hard part is making sure the blade goes to the right place and the spring stays on. Tips: 1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down. 2. When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem. 3. When problem arise the blade holder, try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder. Package Includes: 1 x Blade holder 10 x 30 Degree Cutter Blade (Yellow) 10 x 45 Degree Cutter Blade (Red) 10 x 60 Degree Cutter Blade (Blue)
Features & Highlights
- 30 DEGREE: 30° blades are predominantly used for cutting very thin window tint and mylar materials. 45 DEGREE: 45° blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calendered vinyls as well as other thin materials.
- 60 DEGREE: 60° blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist. High hardness, come with springs and blade holder base. 10 pcs for each degree.TOTAL 30 Graphtec blades.
- APPLICATION: The Hard Alloy Cutter Blades are with fine polishing process, suitable for mahogany, vinyl sheet,wood,silhouette cameo, faux leather,PVC color board, MDF and other precision relief.Compatible with Graphtec CB09U CB09 Cutting Blade Holder.
- NOTE: Graphtec cb09 blades came with NO instructions. please do internet search and watch a few YouTube videos.Looking on YouTube will give you all the information you need to set graphtec blade up.
- AFTER SALES SERVICE: If CB09 CB09U graphtec blade does not fit your Silhouette Cameo machine, please contact us, we will offer you full refund as we want our customers to be 100% satisfied.
30 PCS Cutter Blades
1.77 x 1.65 x 6.26 inches
Have questions about this item (KEKAI), or would like to inquire about a custom or bulk order?
If you have any questions about this product by KEKAI, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
15UA link for Cutter Blade holder: Item specifics:Voltage: 220V,110VModel number: graphtec cutter bladeType: OtherPacking : 5pcs/ boxes(pack)Size : 9UA or 15UA GraphtecColor: 15UA Graphtec. Voltage: 220V,110V. Model number: graphtec cutter blade. Ty...
Drum Cleaning Blade for Sharp MX-2600N/3100NFeature and Specifications:2>Strong stock and 3>Imported raw materials,4>Good optical density and coating uniformity5>Stable performance .Durable.Strong compatibility6>Loog lifeService and Advantage:1>Facto...
mpn: CT-T3000, ean: 0630792442933,
Original & New Cutter Blade for Epson SureColor T3200 T5200 T7200 T3270 T5270 T7270 T3070 T5070 Printer.Original & New.
mpn: CT-7710, ean: 0630792442940,
Original & New cutter blade assembly for Epson Stylus Pro 7700 9700 7890 9890 7900 9900 printer.Original & New.